|
last up-date:
2009-09-15
| |
|
Your pre-selection
from :
STENTERS, STEAMERS, DRYERS, CALANDERS, ETC |
|
click here |
Stenter frames |
|
click here |
Cylinder Press (continous) |
|
|
click here |
Drum dryer (dis-continous) |
|
ZTM |
Photo |
Year |
mm |
Maker |
Pieces |
Description |
|
|
|
|
|
|
|
|
|
|
|
2168 |
click photo |
1993 |
2'400 |
Santex |
1 |
SANTEX Santasoft continuous tumbler, model
2K/240, 2 chambers gas heated and distance between the fixed nozzles 250
mm, ww 2'400 mm, rollers 2'600 mm, year 1993, Planotex at entry
+ exit, plaiter;
3 x 380 Volt + N + E 220 Volt 50 Hz; 100 kW.
Spare parts included: a few Level Sensors.
Catalogue :
Page 1,
Page 2,
Page 3,
Page 4,
Page 5,
Page 6 |
contact |
|
|
|
|
|
|
|
|
|
|
Stenter frames |
|
|
|
|
1262 |
click photo |
1972 |
2'600 |
Famatex |
1 |
FAMATEX stenter frame, 1972, 2'600 mm,
roller width 2'950 mm, natural gas heating,
3 chambers at metres length each, MAHLO Orthomat FMC-9 weft straightener,
520 cm entry, horizontal pin chain, cooling zone at exit.
Motors run an DC, controls run on AC.
Various mechanical spare parts included.
Measurement as installed:
29,2 m long, 5,4 m wide, 2,7 m high.
Outstandingly well maintained and top clean throughout.
EXCELLENT CONDITION
Location:
Central Europe
Scheduled availability : mid
year 2009 |
contact |
|
1246 |
click photo |
1973 |
2'600 |
Famatex |
1 |
FAMATEX stenter frame, roller width 2600 mm,
natural gas heating, 8 chambers,
year 1973;
please inquire for
further information.
Well maintained + in good condition.
Location: Central Europe |
contact |
1940 /
012 |
click photo
|
1987 |
2'200 |
NTM Obermeier |
1 |
NTM OBERMEIER relax dryer, model HF 3/2000 S, year 1987,
ww 2'200 mm, steaming unit at entry, 7 chambers total length 12.7 m, gas heated, new
stainless steel wire mesh conveyor
installed year 2007 for a 15-20 years lieftime, cooling zone at exit;
2 large dust collector containers.
Optional : ZTM 1903
SCHENK large batch winding device is optional, see photos
http://www.ztm.ch/Bildseiten/01903.htm .
Excluding Erhart+Leimer ELSMART !excellent condition.
Location: Central Europe |
contact |
1965 /
036 |
click photo
|
1980
1996
2007 |
2'200 |
Bruckner |
1 |
BRUCKNER stenter frame, ww 2'200 mm, year 1980,
6 chambers total length 18 m, gas heated, vertical pin chain, entry 620
cm long, new NOMEX conveyor belt in year
2007,
belt width 2'400 mm, steaming unit at entry 380 cm long, 848 Setex control, Kusters padder, E+L air-templet, Bassani cloth entry,
Mahlo square metre measuring device, new Pleva in year 2007, cooling
zone at exit, selvedge cutter, exit with indirect rolling, cuttler
and large batcher.
4 chambers are of year 1980 and additional 2 chambers are of year 1996.
Spare parts: new NOMEX belt, gears, etc
The machine was run in one shift per
day only and is in well looked after and
excellent condition.
Location: Central Europe |
contact |
|
1203 |
click photo |
1980
1996
1997 |
1'800 |
Bruckner |
1 |
BRUCKNER stenter frame, year 1980, vertical chain for knits + wovens,
working width 600 to 1'800 mm, roller width 2'200 mm, speed 3 to 60
m/min, CORINO expander roller, length of entry 6,0 m, exit length 3,5 m,
drying length 12,0 m with 4 chambers at 3 m length each, fixation in all
compartments, gas heated (8 gas burners), cooling unit at exit, cuttler
+ rolling device at exit.
Including:
- KUSTERS padder type 222.58-1800, year 1996 for wet-in-wet finishing of
knits, working width 1'800 mm, roller width 2'000 mm, de-watering padder
75 N/mm + finishing padder 50 N/mm, respectively de-watering padder 150
kN + finishing padder 100 kN, pressure 7 bar, cloth speed 100 m/min,energy
requirement at full cloth speed 8,5 kW, water pressure 2 bar (constantly),
steam pressure 2 bar saturated steam, cloth weight 125 g/m2, cloth
quality 100% cotton.
- Selvedge gluing device at entry / selvedge cutting device at exit.
- MAHLO Orthomat-10 weft straightener, year 1997, type FMC-10
Approx. total measurement of entire unit: wide 410 cm, long 30 / 32 m,
high 400 cm
EXCELLENT CONDITION
Location: Germany |
contact |
|
|
|
|
|
|
|
|
|
|
Cylinder press |
|
|
|
|
1949 |
click photo
|
1989
+
2008 |
1'700 |
Drabert & Sons |
1 |
DRABERT & Sons, model Atlas Climat,
continous cylinder press for laminating and pressing (ironing).
ww 1'700 mm, year 1989
FULLY RECONDITIONED - EXCELLENT CONDITION in 2008
Location: Central Europe |
contact |
|
|
|
|
|
|
|
|
|
|
Drum dryer |
|
|
|
|
1719 |
click photo |
1975 |
|
Trofix |
1 |
TROFIX
drum dryer, model
AT
1580,
year
1975.
Location: Central Europe |
contact |
|
1720 |
click photo |
1976 |
|
Trofix |
1 |
TROFIX
drum dryer, model AT 1580-7, year
1976.
Location: Central Europe |
contact |
|
